Digital Monitoring Products Canadain XR500 Manual de instrucciones descargar pdf (Pagina 52)

Digital Monitoring Products XR500 Series Programming Guide

PC Log RePoRts

17.11

SUPV MSG NO YES

Supervisory Reports

Sends system monitor reports, such as AC and battery, and system event reports.

Supervisory Reports also sends the following reports:

• Abort • Exit Error • Ambush

• System Recently Armed • Alarm Bell Silenced • Unauthorized Entry

• *Late to Close

* Only sent as a Supervisory Report if Area Schedules is not enabled, Closing Check is

enabled, and an opening/closing schedule has been programmed.

Note: To send these reports to the PC Log, you must enable SUPV MSG.

17.12 PC Log Real-Time Status

Select YES to send Real-Time Status reports for zones, doors, and outputs. The specic

reports must also be selected by individual zone or output. The Real-Time Status messages

are sent to a PC running a graphic display software. Default is NO.

The messages that can be sent are:

•

Door Open with zone number

• Door Closed with zone number

• Door Open with door number

• Door Closed with door number

• Output On

• Output Off

• Output Pulse

• Output Temporal

PC LOG REAL-TIME

STATUS

NO YES

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 83 84

Sin comentarios

Digital Monitoring Products Canadain XR500 Manual de instrucciones Pagina 52