Digital Monitoring Products Canadain XR500 Manual de instrucciones descargar pdf (Pagina 34)

Digital Monitoring Products XR500 Series Programming Guide

remote options

7.13.4 Entré Backup IP Address

This option displays only if NET is chosen for the Entré connection. Enter the IP backup

address where the panel sends network messages if the rst Entré IP Address fails. The

Entré IP Address must be unique and cannot be duplicated on the network. Enter all

12 digits and leave out the periods. For example, enter IP address 192.168.0.250 as

192168000250. The periods display automatically. Default is 0.0.0.0

7.13.5 Entré Backup TCP Port

This option displays only if NET is chosen for the Entré connection. Enter the backup

programming port number for the outbound Entré connection in case the connection to

the primary IP fails. Default is 2001.

7.13.6 Entré Checkin

Select the rate at which check-in messages are sent over the Entré connection. Select 0

(zero) to disable check in messages. Range is 0, 3-240 minutes. Default is 0.

7.13.7 Entré Passphrase

To enable encryption enter an 8 to 16-character Passphrase using alphanumeric

characters. If you leave the Passphrase blank, the panel communicates with Entré, but

the data is not encrypted. The Passphrase is blank by default.

7.14 Send Local Changes

This option allows the panel to automatically update Remote Link at the central station

with any changes made to the panel.

Select NET or DD to send local programming changes or User Menu changes to user codes,

user proles, schedules, or holiday dates to Remote Link after exiting the programming

or User Menu. If NET is selected, changes are sent using Network. If DD is selected,

changes are sent using Dialer. Default is NO to disable this feature.

7.14.1

REMOTE CHANGE IP

Remote Change IP

This option displays when NET is selected for Send Local Changes. Enter the IP address

containing up to 12 digits. The Net IP Address must be unique and cannot be duplicated

on the network. Enter all 12 digits and leave out the periods. For example, enter IP

address 192.168.0.250 as 192168000250. The periods display automatically. Default is

000.000.000.000

7.14.2 Remote Change Port

This option displays when NET is selected for Send Local Changes. Enter the Port number.

Valid numbers are from 0 to 65535. Default is 2002.

7.14.3 Remote Telephone Number

This option displays when DD is selected for Send Local Changes. Press COMMAND to enter

the phone number the panel dials when sending programming changes. After entering a

phone number, the panel sends any panel changes to Remote Link.

The phone number can have two lines of 16 characters each to equal 32. Enter a P to

program a two second pause in the dialing sequence. The P character counts as part

of the 32 allowable characters. Enter *70P as the string rst characters to cancel call

waiting. Dial tone detect is an automatic panel function.

REMOTE CHANGE

000.000.000.000

CHANGES? NO

NO NET DD

SEND LOCAL

ENTRE BACKUP TCP

PORT: 2001

ENTRE CHECKIN

MINUTES: 0

ENTRE PASSPHRASE

PORT: 2002

REMOTE PHONE NO.

000.000.000.000

ENTRE BACKUP IP:

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 83 84

Comentarios a estos manuales

Sin comentarios

Digital Monitoring Products Canadain XR500 Manual de instrucciones Pagina 34

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Digital Monitoring Products Canadain XR500