Digital Monitoring Products Canadain XR500 Manual de instrucciones descargar pdf (Pagina 14)

Digital Monitoring Products XR500 Series Programming Guide

IntroductIon

1.10 Entering Alpha Characters

Some options during programming require you to enter alpha characters. To enter an alpha character, press or

touch the key that has that letter written below it. The keypad displays the number digit of the key. Next, press

the Select key/area that corresponds to the loca tion of the letter under the key. Pressing a different Select key/

area changes the letter. When an other digit key is pressed, the last letter displayed is retained and the process

starts over.

1.11 Entering Non-Alpha Characters

To enter a space in an alpha entry, press the 9 digit key followed by the third Select key/area. The three

characters on the 9 digit key are Y, Z, and space. You can also enter the following characters: – (dash),

. (period), * (asterisk), and # (pound sign) using the 0 (zero) key and the four Select keys/areas from left to

right. For example, to enter a – (dash), press the 0 (zero) key and then the left Select key/area. A dash now

appears in the keypad display. The table below shows the character locations for DMP keypads.

Key Number Select Key 1 Select Key 2 Select Key 3 Select Key 4

1 A B C (

2 D E F )

3 G H I !

4 J K L ?

5 M N O /

6 P

R &

7 S T U @

8 V W X ,

9 Y Z space _

0 - . * #

1.12 Keypad Displays Current Programming

Each programming option displayed at the keypad shows the currently selected option in the panel memory.

These options are either shown as a number, a blank, or a NO or YES. To change a number or blank to a new

number, press any top row Select key or touch any Select Area. The current option is replaced with a dash. Press

the number(s) on the keypad you want to enter as the new number for that option. It is not necessary to enter

numbers with leading zeros. The panel automatically right justies the number when you press the COMMAND

key.

To change a programming option that requires a NO or YES response, press the Select key or touch the Select

Area for the response not selected. See Figure 8.

For example, if the current option is selected as YES and you want to change it to NO, on Security Command,

Thinline, or Aqualite keypads press the third top row Select key. On Clear Touch or Graphic Touchscreen keypads

touch Select Area 3. The display changes to NO. Press the COMMAND key to display the next option.

THEN

Press the black colored top

row Select key/area.

The keypad displays the new

selection. Press CMD to advance.

YESBELL TST

NOBELL TST

YESBELL TST

NOBELL TST

Thinline,

Aqualite,

Wireless

Keypads

Graphic

Keypads

Figure 8: Changing the Current Programming Option

Figure 7: Thinline/Aqualite/Wireless Select Keys

First Letter

Second Letter

Third Letter

Special Character

(CBA

Figure 8: Clear Touch Select Areas

32-Character Display

Select Area 1

Select Area 3

Select Area 2

Select Area 4

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 83 84

Comentarios a estos manuales

Sin comentarios

Digital Monitoring Products Canadain XR500 Manual de instrucciones Pagina 14

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Digital Monitoring Products Canadain XR500