Digital Monitoring Products Canadain XR500 Manual de instrucciones descargar pdf (Pagina 30)

Digital Monitoring Products XR500 Series Programming Guide

Device Setup

734 Site Code Programming

6.18.9 Site Code Position

Enter the site code start position in the data string. Press any top row Select key to enter

a number between 0-255. Default is 1.

6.18.10 Site Code Length

Enter the number of characters the site code contains. Press any top row Select key to

enter a number between 1-16. Default is 8.

6.18.11 User Code Position

Dene the User Code start bit position. Press any top row Select key to enter a number

between 0-255. Default is 9.

6.18.12 User Code Length

Dene the number of User Code bits. Press any top row Select key to enter

a custom number. On a 734 module, custom numbers can only be between 16-32.

On a 734N/734N-WiFi module, custom numbers can be between 1-255.

The default is 16.

6.18.13 Require Site Code

Press the top row Select key under YES to use a site code.

In addition to User Code verication, door access is only granted when any one site

code programmed at the SITE CODE ENTRY option matches the site code received in the

Wiegand string.

6.18.13.1 Site Code Display

734 Module: You can program up to 8 three-digit site codes. Site code range is

0-999. Any previously programmed site codes display. Dashes represent blank site

codes. Default is blank.

Note: A card with a site code greater than three digits cannot be used. Use

only cards with three-digit site codes.

734N/734N-WiFi Module: You can program up to 8 ve-digit site codes. Site

code range is 1-65535. Any previously programmed site codes display. Site Code

1 defaults to 127. Site Codes 2-8 default to blank. Dashes represent blank site

codes.

Site Code 1 displays rst. Enter a site code number followed by the Command

key to advance to the next option, Site Code 2. To delete an existing site code,

press any Select key. Either enter a new site code followed by Command, or

press Command to leave blank and continue to the next site code. Repeat these

steps to change, delete, or add up to 8 site codes.

6.18.14 Number of User Code Digits

The 734 module recognizes user codes from 4-10 digits in length. The 734N

/734N-WiFi

module recognizes user codes from 1-10 digits in length. Press any top row Select key to

enter a user code digit length. This number must match the user code number length

being used by the panel. Default is 5. For an XR500 Area System, use 4 to 10 digits

(typically 5). For all other systems and panels, use 4 digits.

Any selection above 5 digits require entry of the custom card denitions with custom site

and user code positions for the Wiegand string. When searching the bit string for the user

code, the digits are identied and read from left to right.

SITE CODE

POSITION: 1

SITE CODE

LENGTH: 8

USER CODE

POSITION: 9

USER CODE

LENGTH: 16

REQUIRE SITE

CODE? NO YES

SITE CODE 1: -

SITE CODE 1:

(1-65,535) 127

NO. OF USER CODE

DIGITS: 5

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 83 84

Comentarios a estos manuales

Sin comentarios

Digital Monitoring Products Canadain XR500 Manual de instrucciones Pagina 30

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Digital Monitoring Products Canadain XR500