Digital Monitoring Products Canadian XR100 Manual de instrucciones descargar pdf (Pagina 67)

XR100 Series Programming Guide Digital Monitoring Products

Appendix

Serial Number

Thisnumberisthenetworkcommunicatorserialnumber.Referencethisnumberforcommunicatordate-of-

manufacture, hardware version, etc. Press any top row Select key to display the Serial Number. Press the

COMMAND key to view the next option.

Current Flash

ThisoptiondisplaysFlash1orFlash2indicatingwhichphysicalashchipthepaneliscurrentlyusing.Pressanytop

rowSelectkeytodisplaythecurrentashinformation.PresstheCOMMANDkeytoviewthenextoption.

Communication Status

This option tests the individual components of cellular or network communication. The displayed results are

shown below.

Cellular Results:

Successful Display Failure Display

MODEMOPERATING NOMODEMFOUND

IDENTIFIED NO SIM CARD

TOWERDETECTED NOTOWER

REGISTERED NOTREGISTERED

This displays the cellular signal strength of the nearest tower for the SIM card carrier. The ▐’s

representthesignalstrength0-7.SelectYEStocontinuethroughtheremainingcomponent

tests.SelectNOtostoptestingandreturntotheCOMMSTATUSoption.

Successful Display Failure Display

NOCSUCCESS NOCERROR

COMMPATHGOOD NOACKRECEIVED

Network Results:

Successful Display Failure Display

LINKOK LINKERROR

DHCP OK DHCPERROR

GATEWAYFOUND NOGATEWAY

DESTFOUND NODESTINATION

COMMPATHGOOD NOTCONNECTED

NOACKRECEIVED

Cellular Signal Strength (CELL SIGNAL)

This option provides a way to test the cellular signal strength of the nearest tower for

theSIMcardcarrier.PressanytoprowSelectkeytodisplaycellsignalstrength.TheX’s

representthenumericalvalueofthecellsignalstrengthin-dBm.The▐’srepresentthe

signalstrength0-7.

Activate Cell

Tobeginthecellularactivationfora463Cor464-263CInterfaceModule,verifythatthemodulehasbeen

activatedforthepanelusingRemoteLink.Atthekeypad,pressanytoprowSelectkeywhenACTIVATE CELL is

displayed. When the SURE NO YES?conrmationmenuappearspresstheSelectkeybeneathYEStocompletethe

cellular activation.

Note: Thisoptiononlydisplaysifa463Cor464-263CInterfaceModuleisattachedtothepanel.

Successful Display Failure Display

CELLACTIVATED NOTACTIVATED

Email Status

TheEmailStatusmenutestseachcomponentofthepanel’se-mailcommunication.Thetestproceedsuntilthe

rst component failure or until all components have been tested with positive results. The test screen displays

after each component and displays for two seconds or until the CMD key has been pressed. The displayed results

are shown below.

Email Results:

Successful Display Failure Display Successful Display Failure Display

EMAILENABLED EMAILDISABLED FROMADDRSENT FROMADDRFAILED

LINKOK LINKERROR DESTADDRSENT DESTADDRFAILED

SMTPSERVEROK INVALIDSERVER DATAMODESENT DATAMODEFAILED

DESTADDRESSOK DESTADDRFAILED MESSAGESENT MSGSENDFAILED

CONNECTING CANNOTCONNECT DISCONNECTED DISCONNECTFAIL

AUTHMODESENT AUTHMODEFAILED EMAILSUCCESS

PASSWORDSENT

BADPASSWORD(orUSERNAME)

SIGNAL: ▐▐▐▐▐▐▐

CONTINUE? NO YES

-XX dBm

SIGNAL:

▐▐▐▐▐▐▐

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 77 78

Comentarios a estos manuales

Sin comentarios

Digital Monitoring Products Canadian XR100 Manual de instrucciones Pagina 67

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Digital Monitoring Products Canadian XR100