Digital Monitoring Products Canadian XR100 Manual de instrucciones descargar pdf (Pagina 62)

Digital Monitoring Products XR100 Series Programming Guide

Zone InformatIon

18.12

ALARM ACTION . . . .

Alarm Action

ThisoptionallowsyoutochangeanyZoneTypestandarddenitions.Whenthe

ZoneTypeisspecied,theAlarmActionforthatzoneisstoredinmemory.

IftheZoneTypeisBlank,Night,Day,Exit,Auxiliary1,orAuxiliary2itisa

non-24-hourzoneandtheAlarmActionprogramingbeginswithDisarmedOpen.

IftheZoneTypeisFire,Panic,Emergency,orSupervisoryitisa24-hourzonethat

is always armed and the Alarm Action programming begins with Armed Open.

TheFireVerifyZoneTypefunctionsthesameasFireType,withthefollowing

exceptions:WhenaFireVerifyzoneinitiatesanalarm,thepanelperformsa

SensorReset.IfanyFireVerifyzoneinitiatesanalarmwithin120secondsafterthe

reset,analarmisindicated.Ifanalarmisinitiatedafter120seconds,thecycleis

repeated and a zone fault report is sent to the receiver.

DoNOTprogramFireVerifyZoneTypesforZoneRetard.

18.13

DISARMED OPEN

Disarmed Open

Denestheactiontakenbythepanelwhenthezoneisopenedwhiletheareais

disarmed.Therearethreeactionstodene:Reporttotransmit,RelayOutputto

activate, and Relay Output action.

You must also make these selections for the Disarmed Short, Armed Open, and

Armed Short zone conditions. Press COMMAND to continue.

18.14

MSG: TROUBLE

Report to Transmit

PressanySelectkeytodisplaythefollowingreportoptions:A,T,L,S,and-(dash).

ALARM - Select A to send an alarm report to the receiver and activate the bell

output according to zone type. The zone name appears in the panel alarmed zones

and status lists.

TROUBLE - Select T to send a trouble report to the receiver. The zone name

appears in the panel alarmed zones and status lists.

Note: ULrequirementspreventtheAlarm(A)andTrouble(T)actionforFire(FI),

andFireVerify(FV)zonetypesfrombeingchanged.

LOCAL - WhenyouselectL,analarmreportisNOTsenttothereceiver.Thebell

output activates and the zone name appears in the panel alarmed zones and status

lists.

- (Dash) - Whenyouselecta–(dash),reportsareNOTsenttothereceiver.The

bell output does not activate and there is no display in the panel alarmed zones or

status list. Only the relay output selected in the next section operates.

D S

DOOR PROPPED-SelectingD allows the following operation: The time programmed

intoENTRYDLY4intheSystem Option section begins to count without displaying

on keypad. If the time expires and the zone has not returned to normal, the keypad

troublebuzzerstartsandCLOSETHEDOORappearsonthekeypadsprogrammed

intothePREWARNADDRESSsection.ThetimeprogrammedintoENTRYDLY4begins

to count down again internally. If the time expires a second time and the zone has

notreturnedtonormal,afaultreportissenttothereceiverandthezonename-

OPENmessagedisplaysonthekeypadsuntilacodeisentered.Thebelloutputdoes

not activate for the Door Propped operation.

SILENCE/RESET - SelectSwhenthezone(notFI,SV,orFV)isconnectedtoaDMP

Model303Silence/Resetswitch,thezonecanbeusedtosilencethealarmbelland

perform a sensor reset without using a keypad. A report is NOT sent to the receiver

except for the bell silence report.

18.15

OUTPUT NO: 0

Output Number

You can specify any of the Relay Outputs on the XR100 Series panel to be activated

byazonecondition(1to6,500to599ifModel716used,D1toD8,G1toG20).The

output can be activated regardless of the report to transmit or whether or not the

zone is programmed as local. An output activated by an armed zone is turned off

when the zone area is disarmed by a user.

To enter an output number, press a top row Select key followed by the output

number. Press the COMMAND key.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 77 78

Comentarios a estos manuales

Sin comentarios

Digital Monitoring Products Canadian XR100 Manual de instrucciones Pagina 62

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Digital Monitoring Products Canadian XR100