Digital Monitoring Products Canadian XR100 Manual de instrucciones descargar pdf (Pagina 51)

XR100 Series Programming Guide Digital Monitoring Products

AreA InformAtIon

WhenClosingCheckisNOandAutoArmisYES,thesystemimmediatelyarmswhen

the schedule expires. No warning tone occurs.

In addition, when Closing Check is NO, the option to extend a schedule does not

display when the schedule expires.

17.6

CLS CODE NO YES

Closing Code

WhenYESisselected,acodenumberisrequiredforsystemarming.IfNOis

selected, a code number is not required for system arming.

17.7

ANY BYPS NO YES

Any Bypass

WhenYESisselected,zonescanbebypassedwithoutacodenumberduringthe

armingsequence.AcodenumberisalwaysrequiredtousetheBypassZonesoption

from the menu.

17.8

AREA SCH NO YES

Area Schedules

Select YEStoalloweachareatosetitsownshiftschedules1to4.EnterNO to

provide one set of schedules for this system.

Note:AreaSchedulesarenotdesignedtooperatewithAll/PerimeterorHome/

Sleep/Awaysystems.

17.9

AREA NO: -

Area Number

Enterthenumberoftheareatoprogram.Afterenteringtheareanumber,pressCOMMAND

to enter the area name. Only Area systems allow the area name to be changed.

Note:WhenAll/PerimeterorHome/Sleep/Awayisselectedasthesystemtype,the

Area Number does not display.

17.9.1

INT PERIM

All/Perimeter Programming

WhenAll/Perimeterisselectedasthesystemtype,programtheInteriorand

Perimeter areas as needed.

17.9.2

INT BDRM PERIM

Home/Sleep/Away Programming

WhenHome/Sleep/Awayisselectedasthesystemtype,programtheInterior,

Bedroom, and Perimeter areas as needed.

17.10

* UNUSED *

Area Name

Theareanamecanbeupto32alphanumericcharacters.Toaddanareanameto

thesystem,pressanySelectkeyandthenenterupto32charactersforthenew

area name. Press COMMAND to continue. For instructions on entering alphanumeric

charactersseesection1.7EnteringAlphaCharacters.Inactiveareasaremarked*

UNUSED*.OnlysystemsprogrammedforAreahastheoptionavailabletochange

the area name.

To mark an active area unused, press any top row Select key to delete the old

name, then press the COMMAND key. The programmer automatically programs

thenameas*UNUSED*.IfyouhavealreadyclearedAreaInformationduring

Initialization,allareasaremarked*UNUSED*.SeeInitializationsection.

Home/Sleep/AwaywithGuestsystemsdisplaytheareaname,butthenames

cannot be changed. The following are the display names that appear on the

keypad:

Area Display Area Display Area Display

1 Perimeter 3 Bedrooms 5 GuestInterior

2 Interior 4 GuestPerimeter 6 GuestBedrooms

17.11

ACCOUNT NO: 12345

Account Number

Entertheaccountnumbertobesenttothereceiverforthisarea.Chooseanaccount

number compatible with the Communication Type selected in Communications.

The default Account Number is the one previously entered in Communications.

This account number is used when sending area messages and events to the central

station

See the Area Account Number Messages in the Appendix.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 77 78

Comentarios a estos manuales

Sin comentarios

Digital Monitoring Products Canadian XR100 Manual de instrucciones Pagina 51

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Digital Monitoring Products Canadian XR100