Digital Monitoring Products XTL Series Guía de instalación descargar pdf

InstallatIon GuIde

9000 Series Wireless Keypads

Description

The DMP 9060 and 9063 are fully functioning supervised wireless keypads. They provide installation exibility while also

offering optional codeless arming and disarming capabilities. Each keypad provides:

• Custom 32-character full LCD display

• Three 2-button Panic keys

• Backlit keyboard with easy-to-read lettering

• Internal speaker

• Wall tamper protection

• Keyboard backlighting turns Red in alarm conditions

The Model 9063 keypad also provides a built-in proximity card

reader designed to read DMP/HID proximity credentials for

codeless arming and disarming.

Compatibility

All DMP 1100 Series Wireless Receivers and Panels

What is Included

The 9000 Series Keypad includes the following items:

• One wireless keypad mounted in a Thinline two-part

housing (base and cover)

• One internal rechargeable 3.7V lithium battery

• One 12 VDC DC Plug-in Power Supply

• Serial number label

• Model 9063 also includes a built-in proximity card reader

Keypad Serial Number

For your convenience, an additional pre-printed serial number label is included. Prior to installing the device, record the

serial number or place the pre-printed serial number label on the panel programming sheet. This number is required during

programming.

Programming the Transmitter in the Panel

The keypads can be programmed into the control panel by entering the serial number in Device Setup panel programming,

or alternatively using the wireless keypad association operation (see below). A maximum of 4 keypads may be used with

the panel.

Device Setup Programming

Program the keypad as a device in Device Setup during panel programming. At the serial number prompt, enter the eight-

digit serial number. Continue to program the device as directed in the panel programming guide.

Note: If the keypad serial number is entered manually, the Wireless Keypad Association operation is not required.

Wireless Keypad Association

Enable Wireless Keypad Association operation on both the keypad and panel.

To enable association operation in the keypad, access the Installer Options Menu (3577 (INST)) and select RF Survey. The

keypad logo LEDs turn on Red until association is successful.

To enable association operation in the XTL panel, press the XTL RESET button 3 times within 12 seconds allowing 3 seconds

between each press of the reset button. When in keypad association, the XTL Red and

Green logo LEDs turn on steady.

To enable association operation in the XR100/XR500, XR150/XR350/XR550 or XT30/XT50

panel, reset the panel 3 times within 12 seconds. Allow the keypad bus Transmit/Receive

LEDs to turn back on between each reset.

For 60 seconds the panel listens for wireless keypads that are in the Installer Options

Menu (3577 CMD) and have not been programmed, or associated into another panel.

Those keypads are assigned to the rst open device position automatically based upon

the order in which they are detected. The keypad logo turns Green to indicate it has

been associated with the panel.

Selecting the Proper Location

The 9000 Series keypads provide a built-in survey capability in the Installer Options menu to allow one person to conrm

keypad communication with the panel. See Accessing Keypad Wireless Survey later in this document.

32-Character Display

Data Entry Digit keys

COMMAND Key

Back Arrow Key

Select Keys

Backlit Logo

and Proximity

Antenna

Figure 1: 9000 Series Keypad

Programming

XMIT

RCV

1 2 3 4 5 6 7 8

Indice de contenidos

Pagina 1 - 9000 Series Wireless Keypads

InstallatIon GuIde9000 Series Wireless KeypadsDescriptionThe DMP 9060 and 9063 are fully functioning supervised wireless keypads. They provide install

Pagina 2 - Standby Battery

Digital Monitoring Products 9000 Series Installation Guide2Installing the KeypadAll DMP keypad housings are designed to easily install on any desk st

Pagina 3 - Backlighting

9000 Series Installation Guide Digital Monitoring Products3Battery Replacement1. Disconnect the battery lead connector from the keypad J3 battery he

Pagina 4 - End-User Options

Digital Monitoring Products 9000 Series Installation Guide4Backlit LogoThe backlit logo indicates the armed status of the panel and the power and bat

Pagina 5 - Installer Options Menu

9000 Series Installation Guide Digital Monitoring Products5Installer Options MenuAll keypads provide Keypad Option and Keypad Diagnostic menus to all

Pagina 6

Digital Monitoring Products 9000 Series Installation Guide6Site cOde POSitiOn: 1 Site Code PositionEnter the site code start position in the dat

Pagina 7 - Keypad Entry Delay

9000 Series Installation Guide Digital Monitoring Products7Additional ProgrammingThe 9063 keypads allow users to present a proximity credential to th

Pagina 8 - 800-641-4282

Mas documentos para Los Sistemas De Control De Acceso De Seguridad Digital Monitoring Products XTL Series

a Ver el documento Digital Monitoring Products XTL Series Guía de instalación

Digital Monitoring Products XTL Series Guía de instalación (16 paginas)

Digital Monitoring Products XTL Series Guía de instalación (49 paginas)

a Ver el documento Digital Monitoring Products XTL Series Manual de usuario

Digital Monitoring Products XTL Series Manual de usuario (2 paginas)

Digital Monitoring Products XTL Series Manual de usuario (18 paginas)

Digital Monitoring Products XTL Series Manual de usuario (4 paginas)

Comentarios a estos manuales

Sin comentarios

Digital Monitoring Products XTL Series Guía de instalación

Busca en linea o descarga Guía de instalación para Los Sistemas De Control De Acceso De Seguridad Digital Monitoring Products XTL Series. Digital Monitoring Products XTL Series Installation guide [en] [fr] Manual de usuario

Indice de contenidos

Mas documentos para Los Sistemas De Control De Acceso De Seguridad Digital Monitoring Products XTL Series

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Digital Monitoring Products XTL Series