
Digital Monitoring Products XR100 Series Programming Guide
24
Remote options
7.11.2 Encrypt Cellular Remote
YESencryptsdatasentoveracellularconnection.DefaultisNO.
7.12 Entré Connection
Thisoptiondisplaysonlyifthepanelhasnetworkcapability.SelectNETtoallow
adedicatednetworkconnectionwithEntré.OptionsareNONEorNET.Defaultis
NONE.
7.12.1 Entré Incoming TCP Port
ThisoptiondisplaysonlyifNETischosenfortheEntréconnection.Enterthe
programmingportnumberfortheincomingEntréconnection.Theprogramming
portidentiestheportusedtocommunicatemessagestoandfromtheEntré
software. This port cannot be the same port as programmed in Network
ProgrammingPort.ThedefaultProgrammingPortsettingis2011.
7.12.2 Entré IP Address
ThisoptiondisplaysonlyifNETischosenfortheEntréconnection.EntertheEntré
IPaddresswherethepanelsendsnetworkmessages.TheEntréIPAddressmustbe
uniqueandcannotbeduplicatedonthenetwork.Enterall12digitsandleaveout
theperiods.Forexample,enterIPaddress192.168.0.250as192168000250.Theperiods
display automatically. Default is 0.0.0.0
7.12.3 Entré Outbound TCP Port
ThisoptiondisplaysonlyifNETischosenfortheEntréconnection.Enterthe
programmingportnumberfortheoutboundEntréconnection.Theprogramming
portidentiestheportusedtocommunicatemessagestotheEntrésoftware.
Default is
2001.
7.12.4 Entré Backup IP Address
ThisoptiondisplaysonlyifNETischosenfortheEntréconnection.Enterthe
IPbackupaddresswherethepanelsendsnetworkmessagesiftherstEntréIP
Addressfails.TheEntréIPAddressmustbeuniqueandcannotbeduplicatedon
thenetwork.Enterall12digitsandleaveouttheperiods.Forexample,enterIP
address192.168.0.250as192168000250.Theperiodsdisplayautomatically.Default
is 0.0.0.0
7.12.5 Entré Backup TCP Port
ThisoptiondisplaysonlyifNETischosenfortheEntréconnection.Enterthe
backupprogrammingportnumberfortheoutboundEntréconnectionincasethe
connectiontotheprimaryIPfails.Defaultis2001.
7.12.6 Entré Checkin
Selecttherateatwhichcheck-inmessagesaresentovertheEntréconnection.Select
0(zero)todisablecheckinmessages.Rangeis0,3-240minutes.Defaultis0.
7.12.7 Entré Passphrase
Toenableencryptionenteran8to16-characterPassphraseusingalphanumeric
characters.IfyouleavethePassphraseblank,thepanelcommunicateswithEntré,
but the data is not encrypted. The Passphrase is blank by default.
7.13 Send Local Changes
This option allows the panel to automatically update a remote programming
computer at the central station with any changes made to the panel.
SelectNETorDDtosendlocalprogrammingchangesorUserMenuchangestouser
codes,userproles,schedules,orholidaydatestoRemoteLinkafterexitingthe
programmingorUserMenu.IfNETisselected,changesaresentusingNetwork.If
DD is selected, changes are sent using Dialer. Default is NO to disable this feature.
7.13.1
REMOTE CHANGE IP
Remote Change IP
ThisoptiondisplayswhenNETisselectedforSendLocalChanges.EntertheIP
addresscontainingupto12digits.TheNetIPAddressmustbeuniqueandcannot
beduplicatedonthenetwork.Enterall12digitsandleaveouttheperiods.For
example,enterIPaddress192.168.0.250as192168000250.Theperiodsdisplay
automatically. Default is 000.000.000.000
ENCRYPT CELL
REMOTE? NO YES
ENTRE INCOMING
TCP PORT: 2011
000.000.000.000
ENTRE IP
ENTRE OUTBOUND
TCP PORT: 2001
000.000.000.000
ENTRE BACKUP IP:
ENTRE BACKUP TCP
PORT: 2001
ENTRE CHECKIN
MINUTES: 0
ENTRE PASSPHRASE
-
SEND LOCAL
CHANGES? NO
NO NET DD
000.000.000.000
ENTRE
CONNECTION: NONE
Comentarios a estos manuales