Digital Monitoring Products Canadian XR100 Manual de instrucciones descargar pdf (Pagina 44)

Digital Monitoring Products XR100 Series Programming Guide

Output InfOrmatIOn

Output Information

12.1

OUTPUT INFO

Output Information

This section allows you to program wireless outputs and name wired outputs.

12.2

OUTPUT NO. X X X

Output Number

Enteranoutputnumber.Entryrangeis1to6,450to474,480to499,500to599.

In order for wireless output troubles to display at a keypad, the keypad address

mustbespeciedattheAuxiliary1ZonesoptionintheStatusListprogramming.

12.3

OUTPUT NAME

Output Name

Thissectionallowsyoutodenea32characteralphanumericnameforanyoutput

numbers. The name can display on the keypad when a user performs the browser

featureatOutputsOn/Off.SeetheXR500/XR100User’sGuide(LT-0683)Appendix

for browser operation.

12.4 Output Real-Time Status

SelectingYESallowsReal-TimeStatusreports,suchasOutputON,OFF,PULSE,or

TEMPORALtobesentusingPCLogreports.SelectingNOdisablesReal-TimeStatus

for this output device. Default is NO.

12.5

SERIAL#: XXXXXXXX

Serial Number

This option and the next option only display when the output number entered is for

awirelessoutput.Entertheeight-digitserialnumberfoundonthewirelessdevice.

ALREADY IN USE

OUTPUT NO: XXX

This message displays when the serial number is already programmed for another

output. The programmed output number displays.

12.6

SUPRVSN TIME: 240

Supervision Time

Press any top row key to select the supervision time required for the wireless

output.PressCOMMANDtoacceptthedefaulttime.Defaultis240minutes.

0 3 60 240

Select the required number of minutes. The transmitter must check in at least

once during this time or a missing condition is indicated for that zone. 1100 Series

transmitters automatically check in based on the supervision time selected for

thewirelesszone,noadditionalprogrammingisneeded.Zero(0)indicatesan

unsupervised transmitter.

 The3minutesupervisiontimeisonlyavailableifusingan1135WirelessSiren.

Note: When the panel is reset, a receiver is installed or powered down and

powered up, or programming is complete, the supervision timer restarts for all

wireless outputs.

12.7 Trip with Panel Bell Option

Thisoptiondisplayswhenthewirelessdeviceisan1135wirelesssiren.SelectYES

tohavethe1135wirelesssirenfollowthepanel’sbelloutputcadenceforthezone

typeandbellcutofftimeupto15minutes.DefaultisYES.

OUTPUT REAL-TIME

STATUS

NO YES

TRIP WITH PANEL

BELL NO YES

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 77 78

Comentarios a estos manuales

Sin comentarios

Digital Monitoring Products Canadian XR100 Manual de instrucciones Pagina 44

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Digital Monitoring Products Canadian XR100