Digital Monitoring Products Canadian XR100 Manual de instrucciones descargar pdf (Pagina 17)

XR100 Series Programming Guide Digital Monitoring Products

CommuniCation

3.6

PATH TYPE: BACKUP

Path Type

ThePathTypedenesifthepathisPrimaryorBackup.BecausePath1isPrimary,

thisoptiononlydisplaysforpaths2-8.DefaultisBackup.

Note:IfthePrimaryCommunicationTypeisCELL,thenthebackupCommunication

TypecanonlybeNET.

3.7

TEST RPT: YES

Test Report

Test Report determines if test reports are sent on this path. Reports are sent

according to the programming in Test Frequency and Test Time. Default is Yes.

SelectYEStoallowtheprogrammedtestreporttobesentonthepathcurrently

being programmed.

SelectDEFERtonotsendatestreportifthepanelcommunicatesanymessage

to the receiver within the time set in Test Frequency. Select NO to not send test

reports on this path.

3.8

TEST FREQ: 1 DY

Test Frequency

TestFrequencydeterminesthefrequencyofthetestreport.Enteranumberfrom1

to60andselectDY(Day)orHR(Hour)bypressingthefarrighttoprowselectkey.

Default is 1 Day.

3.9

TEST DAY: SUN

Test Day

UsethisoptiontosetthedayoftheTestReport.ThisoptionappearsonlywhenTest

Report is Yes, Test Frequency is Day and a multiple of seven. Press the COMMAND key

todisplaytherstfourdaysoftheweek.PresstheCOMMANDkeytodisplaythelast

three days. Select the day of the week to send the test report. Default is Sunday.

3.10

TEST TIME:

0:00 AM

Test Time

UsethisoptiontoselectthetimeofdayforTestReports.Selectthehour,minute

andAM/PM.Enter0:00AMtodisablethisfeature.Defaultis0:00AM.

3.11

CHECKIN: NO YES

Check In

ThisoptiondisplaysiftheCOMMTYPEisNET,orCELL.Check-inreportsarea

methodofsupervisingthepanelforcommunicationwiththereceiver.ForNETthe

defaultisYES.ForCELL,thedefaultisNO.

CHECKIN:

NO YES RND ADPT

SelectRND(Random)forthepaneltocheck-inatrandomtimesfrom6to60minutes

whenallareasaredisarmed.Ifanyareaisarmedacheck-inissentevery6minutes.

SelectADPT(Adaptive)forabackuppathtoadapttothecheck-inprogramming

fromthisgroupsprimarypathiftheprimarypathbecomesunavailable.Check-in

programmingincludesCheck-inandFailTime.

CHECKIN:

ADP3

SelectADP3(Adaptive3)forabackuppathtoadaptusinga3minuteCheck-inand

Fail Time if the primary path becomes unavailable. This option also indicates a

CommunicationTrouble(S10)ifthecelltowerisunavailablefor3minutes.

CHECKIN MINS: 200

WhenYESisselected,enterthenumberofminutesbetweencheck-inreports,from

2to240forNETor3to240forCELL,whenthepanelisarmedordisarmed.For

CELL,thedefaultis0.ForNETthedefaultis200.

3.12

FAIL TIME: 240

Fail Time

ThisoptiondisplaysifCHECKINissettoYES.EnteringaFAILTIMEallowsthe

receivertomissmultiplecheck-insbeforeloggingthatthepanelismissing.The

maximumfailtimeis240minutes.Forexample,ifCHECKINis10andFAILTIMEis

30,thereceiveronlyindicatesaPanelNotRespondingafter30minutes.TheFAIL

TIMEmustbeequaltoorgreaterthantheCHECKINtime.Defaultis0forCELL.

Defaultis240forNET.

3.13

RECEIVER IP

Receiver IP

ThisoptiondisplaysonlyiftheCommunicationTypeisNETorCELL.Enterthe

Receiver IP address where the panel sends network messages. The Receiver IP

Addressmustbeuniqueandcannotbeduplicatedonthenetwork.Enterall12

digitsandleaveouttheperiods.Forexample,enterIPaddress192.168.0.250as

192168000250.Theperiodsdisplayautomatically.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 77 78

Comentarios a estos manuales

Sin comentarios

Digital Monitoring Products Canadian XR100 Manual de instrucciones Pagina 17

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Digital Monitoring Products Canadian XR100