Digital Monitoring Products Canadian XR100 Manual de instrucciones descargar pdf (Pagina 33)

XR100 Series Programming Guide Digital Monitoring Products

SyStem RepoRtS

7.13.2

REMOTE CHANGE

Remote Change Port

ThisoptiondisplayswhenNETisselectedforSendLocalChanges.EnterthePort

number.Validnumbersarefrom0to65535.Defaultis2002.

7.13.3 Remote Telephone Number

ThisoptiondisplayswhenDDisselectedforSendLocalChanges.PressCOMMANDto

enter the phone number the panel dials when sending programming changes. After

enteringaphonenumber,thepanelsendsanypanelchangestoRemoteLink.

Thephonenumbercanhavetwolinesof16characterseachtoequal32.Entera

P to program a two second pause in the dialing sequence. The P character counts

aspartofthe32allowablecharacters.Enter*70Pasthestringrstcharactersto

cancel call waiting. Dial tone detect is an automatic panel function.

System Reports

8.1

SYSTEM REPORTS

System Reports

Selectspecicsystemreportsthepanelsendstothereceiver.

8.2

ABORT NO YES

Abort Report

YES allows the panel to send an alarm abort report to the receiver any time an

area is disarmed during Transmit Delay before an alarm report is sent and the Bell

Cutoff Time has not expired. After disarming an area, if any other area remains

armedandhaszone(s)inalarm,thealarmabortreportisnotsent.

If the communication type is set to DD, a Warning: Alarm Bell Silenced report is

also sent if the alarm bell is silenced.

Note:AbortReportsarenotsentforFire,FireVerify,orSupervisorytypezones.

8.3

RESTORAL: YES

Restoral Reports

This option allows you to control when and if a zone restoral report is sent to the

central station receiver. Press any Select key to display the following options:

NO YES DISARM

NO -Disablesthezonerestoralreportoption.Zonescontinuetooperatenormally

but do not send restoral reports to the receiver.

YES -Enablesthezonerestoralreportoption.Zonerestoralsaresentwhenevera

zone restores from a trouble or alarm condition.

DISARM -Causesthepaneltosendrestoralreportsforanon-24-hourzone

whenever a zone that has restored from a trouble or alarm condition is disarmed.

All24-hourzonessendrestoralreportsastheyrestore.

Note: For UL applications, Restoral Reports must be set to YES.

8.4

BYPASS NO YES

Bypass Reports

YES allows the panel to send all zone bypasses, resets, and force arm reports to

the receiver. The bypass report includes the zone number, zone name, and the user

name and number of the individual operating the system. Reports are only sent if

O/CUserinCommunicationsissetYESforReceiver1orReceiver2.

8.5

SCHD CHG NO YES

Schedule Change Reports

YES allows the panel to send all schedule changes to the receiver. The report

includes the day, opening time, closing time, extend schedule time, and the user

name and number of the individual making the change. Schedule changes made

throughRemoteLink™arenotsenttotheprinterorDisplayEvents.

8.6

CODE CHG NO YES

Code Change Reports

YESallowsthepaneltosendallcodeadditions,changes,anddeletionstothe

receiver. The code change report includes the user name and number added or

deleted and the user name and number of the individual making the change. Code

changesmadethroughRemoteLink™arenotsenttotheprinterorDisplayEvents.

ReportsareonlysentifO/CUserinCommunicationsissetYESforReceiver1or

Receiver2.ThedefaultsettingisYES.

PORT 2002

REMOTE PHONE NO.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 77 78

Comentarios a estos manuales

Sin comentarios

Digital Monitoring Products Canadian XR100 Manual de instrucciones Pagina 33

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Digital Monitoring Products Canadian XR100