Digital Monitoring Products Canadian XR100 Manual de instrucciones descargar pdf (Pagina 56)

Digital Monitoring Products XR100 Series Programming Guide

Zone InformatIon

18.7

ARM/DIS AREAS

Arming Zone Area Assignment

InanAreaorHome/Sleep/AwaywithGuestsystem,ifthezonehasbeen

programmedasanArmingType(AR),entertheareasthatthezonecontrols.

When the zone changes from normal to shorted, the programmed areas toggle

between the armed or disarmed condition using the Style programming below.

When restored to normal, no action occurs. When the zone is opened from a normal

(disarmed)state,atroubleisreported.Whenopenedfromashorted(armed)state,

analarmisreportedandthezoneisdisableduntilyoudisarmthearea(s)fromeither

akeypadorRemoteLink™computer.

Tovisuallyindicatethearmedstateofthearea(s),youcanassignanArmedOutput

toindividualareasanduseremoteLEDsatthekeyswitch.TheLEDturnsonoroff

toindicatetotheuserthearmedstateofthearea(s).

ARM AREAS: PERIM

InanAll/PerimeterorHome/Sleep/Awaysystem,thisoptionspeciestheareas

tobearmedbytheArmingTypezone.ForAll/Perimetersystems,choosePERIMor

ALL,forHome/Sleep/AwayorHome/Awaysystems,chooseHOME,SLEEP,orAWAY.

PERIM ALL

Perimeter/All-SpecifywhetherthearmingzonearmsjustthePerimeter(PERIM)or

thePerimeterandInteriorareas(ALL)forAll/Perimetersystems.Whendisarming,

all areas are disarmed.

HOME SLEEP AWAY

Home/Sleep/Away-SpecifywhetherthearmingzonearmsthePerimeter(HOME),

thePerimeterandInterior(SLEEP),orallthreeareas(AWAY).Whendisarming,all

areas are disarmed.

Arming Zone Operation

IfanybadzonesarepresentwhentheArmingzoneisshorted,theLEDdelays

lightingfor5seconds.Ifduringthe5-seconddelaytheArmingzoneisshorted

again no arming takes place. If 5 seconds expire without the zone shorting again

or restoring to normal, the areas arm and bad zones are force armed. To allow bad

zonestobeforcearmed,theAnyBypassoptionmustbesettoYES.IfAnyBypass

optionissettoNO,armingdoesnotoccur.SeetheAreaInformation-AnyBypass

section. A priority zone cannot be force armed.

18.8

STYLE:

Style

Thisoptionspeciesthestyleforthearming/disarmingoperation.Thedefault

styleisTGL(toggle).PressanySelectkeytodisplaytheSTYLEoptions.Toview

more style options press the COMMAND key.

TGL ARM DIS STEP

TGL (Toggle) - When the zone changes from normal to shorted, the programmed

areas toggle between the armed or disarmed condition. When restored to normal,

noactionoccurs.Whenthezoneopensfromanormal(disarmed)state,atroubleis

reported.Whenopenedfromashorted(armed)state,analarmisreportedandthe

zoneisdisableduntilyoudisarmthearea(s)fromeitherakeypadorRemoteLink.

ARM - When the zone is shorted, the programmed areas are armed. When restored

tonormal,noactionoccurs.Whenthezoneisopenedfromanormal(disarmed)

state,atroubleisreported.Whenopenedfromashorted(armed)state,analarm

is reported.

DIS (Disarm) - When programmed, a short disarms the programmed areas. When

restored to normal, no action occurs. When the zone is opened from a normal

(disarmed)state,atroubleisreported.

STEP - A short arms the areas and beeps the keypads once. A normal condition

causes no action. An open condition disarms the programmed areas and beep the

keypads for one second.

Note: This arming style is designed for wireless arming pendants. When using a

arming/disarmingkeyswitchlocatethekeyswitchwithintheprotectedarea.

MNT

MNT (Maintain) - When the zone is shorted, the programmed areas are armed.

When restored to normal, the programmed areas are disarmed and any alarm bells

aresilenced.Whenthezoneisopenedfromanormal(disarmed)state,atrouble

isreported.Ifopenedfromashorted(armed)state,analarmisreportedandthe

zoneisdisableduntilyoudisarmthearea(s)fromeitherakeypadorRemoteLink.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 77 78

Comentarios a estos manuales

Sin comentarios

Digital Monitoring Products Canadian XR100 Manual de instrucciones Pagina 56

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Digital Monitoring Products Canadian XR100