Digital Monitoring Products Canadian XR100 Manual de instrucciones descargar pdf (Pagina 18)

Digital Monitoring Products XR100 Series Programming Guide

CommuniCation

3.14

RECEIVER PORT -

Receiver Port

2001

Enterthereceiverportnumber.Validrangeis1to65,535.Defaultis2001.

3.15

FIRST PHONE NO.

First Telephone Number

This option displays only if the Communication Type is DD or CID.

Thisistherstnumberthepaneldialswhensendingreportstothereceiver.Phone

numberscanhavetwolinesof16characterseachtoequalupto32characters.

EnterPtoprogramathree-secondpauseinthedialingsequence.ThePcharacter

countsaspartofthe32allowablecharacters.

EnterRastherstcharacterforrotary(pulse)phonefunction.TheRcharacter

countsaspartofthe32allowablecharacters.

Call Waiting: You can place the “*70P”(Star,Seven,Zero,Pause)inthe

telephonenumberrstpositiontocancelCallWaiting.Forexample,programNET

withsecondlineDDandphonenumber*70P555-1212,andyouhaveNETwithCall

Waiting cancelled on the second line.

Caution:Acallwaitingcancelprogrammedonanon-callwaitingtelephoneline

would prevent communication to the central station.

3.16

SECOND PHONE NO.

Second Telephone Number

Thepaneldialsthesecondnumberwhentwosuccessivetriesusingtherstnumber

fail. If the panel cannot reach the receiver after two attempts using the second

number,itreturnstotherstnumberandmakestwoadditionalattempts.Atotal

oftendialingattemptsaremadeusingtherstandsecondphonenumbers.

Eachnumbercanbeupto32charactersinlengthincludinganyPorRcharacters

entered for pause or rotary connections or call waiting cancel option.

Should all ten attempts fail, the panel continues to attempt sending the message

using the next programmed path. If all programmed communication paths fail, the

panel clears the communication buffer and makes one communication attempt

eachhourtosendaTRANSMITFAILED(S87)reporttothereceiver.AccesstheUser

MenuDisplayEventsfeaturetoviewthereportinformationnotsenttothereceiver

ordownloadthereportwithDMPRemoteLink™software.

3.17

ADVANCED? NO YES

Advanced Programming

Select Yes to enter the Advanced Programming menu for the communication path

currently being programmed.

3.18 First GPRS APN

EntertherstAPN(AccessPointName).Thisallowsanaccesspointforcellular

communication and is used to connect to a DNS network. The APN may contain two

linesof16characterstoequal32characters.DefaultissettoSECURECOM400.

Note:Thisoptionisnotusedwhena463CCDMAor464-263CCellular

Communicator is used for communication.

Second GPRS APN

EnterthesecondAPN(AccessPointName).Thisworksasabackupincasetherst

APNfails.TheAPNmaycontaintwolinesof16characterstoequal32characters.

DefaultissettoSECURECOM400.

Note:Thisoptionisnotusedwhena463CCDMAor464-263CCellular

Communicator is used for communication.

3.19

FAIL TEST HRS: 0

Fail Test Hours

This option sets the frequency for a Backup or Adaptive path to send a test report

when the closest previous path fails within its path group.

For example, if a backup path is programmed to send a weekly test report and the

FailTestFrequencyissetto2hours,whenthepreviouspathfailswithinitsgroup,

thebackuppathstartssendingatestevery2hoursuntilthepreviouspathrestores.

If Fail Test Frequency is set to 0, test reports are sent only according to Test Report

programming.Rangeis0to24hours.Defaultis0.

SECURECOM400

SECOND GPRS APN

SECURECOM400

FIRST GPRS APN

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 77 78

Comentarios a estos manuales

Sin comentarios

Digital Monitoring Products Canadian XR100 Manual de instrucciones Pagina 18

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Digital Monitoring Products Canadian XR100