Digital Monitoring Products Canadian XR100 Manual de instrucciones descargar pdf (Pagina 36)

Digital Monitoring Products XR100 Series Programming Guide

SyStem OptiOnS

9.10

RST SBYP NO YES

Reset Swinger Bypass

WhenYESisselected,anautomaticallybypassedzoneisresetifitremainsin

a normal condition for one complete hour after being bypassed. A report of the

automaticresetissenttothereceiverifBypassReportshasbeenselectedasYES.

Default is NO.

Note: Not investigated by UL.

9.11

TIME CHG NO YES

Time Zone Changes

This function allows the panel to request automatic time changes from the DMP

SCS-1RReceiveronPath1.Forthereceivertosendtimechanges,itmustbe

programmed to send time changes and must be receiving time change updates from

thenetworkautomationcomputeratleastevery24hours.DefaultisYES.

HRS FROM GMT: 6

WhentimezoneisprogrammedYES,enterthenumber(0-23)thatindicatesthe

GreenwichTimezone(GMT)wherethepanelislocated.Thedefaultis6.

GMT City/Time Zone GMT City/Time Zone

0 London, Monrovia, Lisbon, Dublin, Casablanca, Edinburgh 13 New Cadelonia

1 Cape Verde Island, Azores 14 Guam, Sydney

2 Mid-Atlantic, Fernando de Noronha 15 Tokyo, Seoul

3 Buenos Aires, Georgetown, Brasilia, Rio de Janeiro 16 Hong Kong, Singapore

4 Atlantic Time (Canada), Caracas, La Paz, Santiago 17 Bangkok, Hanoi

5 Eastern Time (US, Canada) Bogota, Lima, Arequipa 18 Dhaka, Almaty

6 Central Time (US, Canada), Mexico City, Saskatchewan 19 Islamabad, Karachi

7 Mountain Time (US, Canada), Edmonton 20 Abu Dhabi, Kazan

8 PacicTime(US,Canada),Tijuana 21 Moscow, Bagdad

9 Alaska 22 Eastern Europe

10 Hawaii 23 Rome, Paris, Berlin

11 Midway Island, Samoa

12 Fiji, Marshall Island, Wellington, Auckland, Kwajalein, Kamchatka

9.12

LATCH SV NO YES

Latch Supervisory Zones

SelectingYESlatchessupervisoryzonealarmsonthekeypaddisplayuntilthe

sensor reset operation is performed. Selecting NO automatically clears the alarm

from the keypad display when the supervisory zone restores to a normal condition.

DefaultisYES.

9.13

PROG LANGUAGE

Programming Menu Language

PresstheCOMMANDkeytoselecttheprogramminglanguage.AnychangesinPROG

LANGUAGEdonottakeeffectuntiltheSTOProutinecompletes.

PRI LANG: ENGLSH

The current primary programming language displays. The default language is

English.PressaSelectkeytochangetheprimaryprogramminglanguage.

ENG SPN FRN

Select the primary programming language.

ENG=English(ENGLISH)

SPN=Spanish(ESPANOL)

FRN=French(FRANCAIS)

SEC LANG: NONE

The current secondary programming language displays. Selecting a secondary

languageallowstheinstallertoviewprogramminginEnglish,Spanish,orFrench.

When the Programming Menu is accessed, the installer is prompted to choose the

programmingdisplaylanguage.IfSECLANG:issettoNONE,theoptiontochoose

a language does not display. To select a secondary language, press the Select key

belowthelanguage.DefaultisNONE.

NONE ENG SPN FRN

Select the secondary programming language.

NONE=Nosecondarylanguageoptionsaredisplayed

ENG=English(ENGLISH)

SPN=Spanish(ESPANOL)

FRN=French(FRANCAIS)

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 77 78

Comentarios a estos manuales

Sin comentarios

Digital Monitoring Products Canadian XR100 Manual de instrucciones Pagina 36

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Digital Monitoring Products Canadian XR100