Digital Monitoring Products Canadain XR500 Guía de usuario descargar pdf (Pagina 83)

System Link User’s Guide 73

Copying/Pasting User Code Information

To copy a user and the user code information to another partition or another panel of the

same model, open the panel from which you will copy the user code information. Select

Programming > User Codes.

Note: Profiles must be the same in both panels and both partitions to accurately copy and

paste user code information.

Pasting User Information into a Different Partition

In the User Codes window, select the user to be copied from the list on the left-hand

side. Click the Copy button. Click the Paste button. This will automatically paste the

user into the panel, allowing you to then change the Partition number.

Pasting User Information into a Different Panel

Note: To copy a user to a different panel, the two panel models must be the same. For

example, to copy a user from an XR40 Command Processor™ Panel, the second panel must

be an XR40.

In the User Codes window, select the user to be copied from the list on the left-hand

side. Click the Copy button.

Select File > Close Panel to close that panel. Then select File > Panel Information

and open the panel to which you will copy the user code information.

Select Programming > User Codes and click the Paste button. This will paste all of the

user code information you copied from the first panel into the second panel.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 103 104

Sin comentarios

Digital Monitoring Products Canadain XR500 Guía de usuario Pagina 83