Digital Monitoring Products Canadain XR500 Guía de usuario descargar pdf (Pagina 18)

System Link User’s Guide

Quick Connect

Connecting Directly to a Panel through a 462N Interface Card or

XR500 Series Serial Port

To configure System Link to connect directly to a panel, follow the steps below:

1. Select the desired panel in File > Panel Information.

2. In the Connection Information group box, select Direct from the drop-down

menu in the Type field.

3. Select the COM Port to which the panel is connected.

4. Select the Baud Rate of the COM Port.

Note: You only need to complete these steps one time. On further connections simply

select the panel and then Connect as explained below.

After you have entered all the Connection Information, open the panel by clicking OK.

Then go to Panel > Connect and click the Connect button. You are now connected to

the panel.

Connecting to a Panel using an SCS-1, SCS-1R, or SCS-105 Receiver

To configure System Link to connect to a panel through an SCS-1, SCS-1R, or SCS-105

Receiver using a dial-up connection, follow the steps below:

1. Select the desired panel in File > Panel Information.

2. In the Connection Information group box, select SCS-1/SCS-105 from the

drop-down menu in the Type field.

3. Enter the Remote Key.

4. Enter the phone number of the panel.

5. Select Yes from the drop-down menu in the Dial field.

Note: You only need to complete these steps one time. On further connections simply

select the panel and then Connect as explained below.

After you have entered all the Connection Information, open the panel by clicking OK.

Then go to Panel > Connect and click the Connect button. You are now connected to

the panel.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 103 104

Sin comentarios

Digital Monitoring Products Canadain XR500 Guía de usuario Pagina 18