Digital Monitoring Products Canadain XR500 Guía de usuario descargar pdf (Pagina 69)

System Link User’s Guide 59

Outputs

Click on the Outputs button in Panel >

System Status to open the Output

Status window that allows you to view the

status of the relay outputs connected to a

panel. The Output Status window also

allows you to grant Door Access.

To view the status of outputs on a panel,

enter an output number in the Start at

Output Number field at the top of the

window and click on the Request button.

The Status column below the Request

button displays the status of each output:

Steady, Pulse, or Off.

Turning Outputs On and Off

The Output Status window allows you to

remotely turn on or off any of the output relays on a panel. You may also specify Steady,

Pulse, Momentary, or Off for any of those same relays.

To control the output relays, click on the Output tab near the bottom of the window.

Then type the number of the output in the Output field at the bottom left corner of the

Output Status window. You may also select an output from the list by clicking on that

line once.

After selecting an output relay, chose which action you wish to apply to that output by

clicking on one of the four buttons.

Steady

: Send continuous power to the output.

Pulse

: Pulse the output at 1-second intervals.

Momentary

: Send power to the output one time for 1-second.

Off

: Turn off an output, such as disabling an alarm bell.

System Messages

After you send a command to an output relay, System Link displays one of the following

messages:

Output command successfully sent

: the panel has accepted the output number and

operation you entered.

Invalid output number

: There is no output on the panel at the output address you

entered.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 103 104

Sin comentarios

Digital Monitoring Products Canadain XR500 Guía de usuario Pagina 69