Digital Monitoring Products Canadain XR500 Guía de usuario descargar pdf (Pagina 68)

System Link User’s Guide

Zone Bypass / Reset

The Zone Status window allows you to use System Link to bypass and reset any zone on

the panel. Select Panel > System Status and click on the Zones button to open the

Zone Status window.

To view the status of any area or zone, fill in the Start at Zone, Partition, and Area

fields at the top of the window and click on the Request button. Selecting the 24-hour

box displays all Fire, Fire Verify, Supervisory, Emergency, and Panic zones.

To bypass a zone, select the appropriate zone from the list in the Zone Status window

and click on the Bypass button. The zone remains bypassed until reset from System Link

or from the keypad User menu. In addition, the bypassed zone remains bypassed until the

area is disarmed.

To reset a zone, select the appropriate bypassed zone from the list in the Zone Status

window and click on the Reset button.

Note: Use caution when bypassing. Be certain of the zone type and the implications of

bypassing it before attempting to bypass a zone.

Status messages

The list in the Zone Status window displays the status of the zone for which you request

information. The status column contains one of the following messages.

•

Normal

•

Bypassed

•

Open

•

Short

System Messages

System Link displays one of the following messages when you send a command to bypass a

zone on a panel.

Zone

was successfully bypassed

Zone

was successfully reset

Unable to bypass priority zone

: The zone you specified is a priority zone, and

priority zones cannot be bypassed. Priority zones are programmed in Program >

Zone Information.

Unused zone

: The zone you designated is not programmed on this panel.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 103 104

Sin comentarios

Digital Monitoring Products Canadain XR500 Guía de usuario Pagina 68