Digital Monitoring Products XR550 Manual de instrucciones descargar pdf (Pagina 53)

XR150/XR350/XR550 Series Programming Guide Digital Monitoring Products

ZONE INFORMATION

Zone Information

18.1 Zone Information

Zone Information allows you to dene the operation of each protection zone used in the

system. All protection zones, whether located on a panel, Security Command keypad, or

zone expander are programmed the same way.

18.2 Zone Number

Enter the number of the zone you intend to program. Available zone numbers are shown in

the table below. The keypad zone numbers begin with the keypad address and are followed

by the particular zone from that keypad. For example, a 7073 at keypad address 7 would

provide zones 71, 72, 73, and 74. Press COMMAND to enter a zone name.

Note: The available LX-Bus connections for the panels are:

XR150-LX500

XR350-LX500 through LX700

XR550-LX500 through LX900

Address Programming Zone Number

Panel 1-10

1 11-14

2 21-24

3 31-34

4 41-44

5 51-54

6 61-64

7 71-74

8 81-84

9 91-94

10 101-104

11 111-114

12 121-124

131-134

14 141-144

15 151-154

16 161-164

1100 Series Key Fob 400-449

LX-Bus 500 500-599

LX-Bus 600 600-699

LX-Bus 700 700-799

LX-Bus 800 800-899

LX-Bus 900 900-999

Note: For 1100 Series Key Fob zones (400-449), programming continues at the 1100 Series

Key Fobs Section.

18.3 Zone Name

Zone names can have up to 32 alphanumeric characters. A name must be given to each

zone in the system. The name can display at the keypads during arming and disarming so

the user does not have to memorize zone numbers. Users can asso ciate a zone name with a

particular protection point. A zone that is not part of the system must be marked unused.

To add a zone name to the system, press any Select key and then enter up to 32 characters

for the new zone name. Press COMMAND to continue.

To mark a zone unused, de lete the old name by pressing a top row Select key, then press

the COMMAND key. The pro grammer auto matically pro grams the name as * UNUSED *. If you

have already cleared Zone Information during Initialization, the zones is marked

* UNUSED *.

ZONE INFORMATION

ZONE NO: -

* UNUSED *

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 77 78

Comentarios a estos manuales

Sin comentarios

Digital Monitoring Products XR550 Manual de instrucciones Pagina 53

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Digital Monitoring Products XR550