Digital Monitoring Products XR550 Guía de usuario Pagina 83

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 88
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 82
Appendix F XR550/XR350/XR150 User Guide 79
Common Keypad Displays
Listed below are several keypad messages you may see on the display. Follow the instructions in the Possible Solutions column to
correct the problem. In many cases, you need to call a service person to correct the problem. Displays that are not discussed here
mean that your service representative should be called.
Message Meaning Possible Solutions
INVALID AREA
The user has attempted a door access for an area they
are not assigned.
Change the user access areas if access to the area is
needed. If access is not needed, the user cannot enter
the area.
INVALIDCODE
Theusercodeyouenteredisnotrecognizedbythe
system.
Check the user code and try again.
INVALIDPROFILE
A user has attempted a function that is outside of the
assignedprole.
Checktheuserprolesettings.
INVALID TIME
Ausercodeassignedtoaspecicschedulehasentered
outside of the valid schedule.
See Schedules and User Codes.
ENTER2NDCODE
The area you are attempting to disarm or access is a
Two Man Area.
A second and different user code must be entered.
CLOSINGTIME
The scheduled has expired but the area has not been
armed.
Users still on the premise should arm the system or
extend the schedule to a later time.
LATETOCLOSE
The system was not armed at its scheduled closing
time.
Users still on the premise should arm the system or
extend the schedule to a later time.
FAILEDTOEXIT
A user assigned the anti-passback option has attempted
to re-enter an area from which they did not exit
properly.
The user must exit the area through the proper door. If
not possible, your system administrator should select
the Forgive option in the User Codes menu.
ZWAVEBUSY
OnlyonekeypadatatimecanaccessZ-WaveSetup.
If a user attempts to access the menu from a second
keypadZ-WAVEBUSYwillbedisplayed.
The user must exit Z-WaveSetupinonekeypadbefore
accessing it in a second keypad.
Vista de pagina 82
1 2 ... 78 79 80 81 82 83 84 85 86 87 88

Comentarios a estos manuales

Sin comentarios