Digital Monitoring Products XR550 Guía de usuario descargar pdf (Pagina 47)

XR150/XR350/XR550 User Guide 43User Menu

9. At the PROFILE NO:  - display, enter a prole number

from 1 to 99, and press COMMAND. The displays shows

USER#ADDED.

Note:IfBAT(Batch)waschoseninstep4insteadofADD,

the next available user number is automatically selected

andonlysteps6and7repeat.TheUserProleassignment

is automatically selected for the next user based on the

previous user entered. This batch entry method speeds up

user entry in large systems.

Browser Feature

Refer to Appendix B at the back of this guide for a diagram showing

you how to use the Add User Codes browser.

Changing User Codes

Tochangeausercode,youmusthaveausercodewithaprole

that has user code authority.

1. Access the User Menu.

2. Press the COMMANDkeyuntilUSERCODES?displays.

3. Press any Select key. The keypad displays ADD DEL CHG

B AT.

4. Select CHG to change a user code.

5. At the USER NUMBER: - option, enter the user number to

change and press COMMAND.

Refer to the System Setup section for the number of user codes

available for your system.

6. The display changes to USER CODE: * * * * * *. Press any

Select key and enter the new user code. Press COMMAND.

7. The display then shows the current user name. Press any

top row key to clear. See Entering Names in Appendix D to

enter a new name.

Note: Changing a user code does not change the user number.

8. The display changes to PROFILE NO: -. Select the prole

numbertoassignasetofauthorizedfunctionstotheuser

codeasoutlinedintheUsersProleChart.

9. After entering the prole number, the keypad displays

USER# CHANGED for ve seconds followed by USER

NUMBER: -. This display allows you to enter another user

number to change. Press the Back Arrow key twice to exit

the User Menu.

Changing Own User Code

Your system may be programmed at installation to allow users to

change their own user code.

1. Access the User Menu.

2. Press the COMMANDkeyuntilUSERCODES?displays.Press

any Select key.

3. The display changes to USER CODE: * * * * * *. Press any

Select key.

4. Type your new user code. Press Command.

Browser Feature

Refer to Appendix B for diagrams showing you how to use the

Change User Codes browser.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 87 88

Comentarios a estos manuales

Sin comentarios

Digital Monitoring Products XR550 Guía de usuario Pagina 47

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Digital Monitoring Products XR550