Digital Monitoring Products XR550 Guía de usuario descargar pdf (Pagina 36)

32 XR150/XR350/XR550 User Guide User Menu

REMOVE Devices from FAVORITES

1. Access the User Menu.

2. Press COMMANDuntilZWAVESETUP?displays.

3. PressanySelectkey.ThekeypaddisplaysADDLISTREMOVE.

4. Press COMMANDagaintodisplayFAVXFERREDISC.Select

FAVandFAVORITENUMBER:-isdisplayed.

5. Enter a Favorite number between 1 and 20, press COMMAND.

6. The Favorite number and name displays. Press COMMAND

and the FavoriteNameandADDEDITREMOVEdisplays.

7. Select REMOVE and the rst Z-Wave device stored in the

Favorite displays.

Remaining devices can be viewed by

pressing the COMMANDkey.

8. Press any Select key to remove the device from the Favorite.

REMOVE DEVICE FROM FAV? NO YES displays. When YES is

selected, the device is removed from the Favorite.

Transfer Controller (XFER)

This option allows the transfer of all existing Z-Wavedevicesthat

are currently programmed in another manufacturer’s Z-Wave

portable controller to your system.

This operation will overwrite all Z-Wavedevicesthat are

programmed in your system. This option typically occurs at

thetimeyourDMPZ-Wavecontrollerisinstalled.

Initiatethetransferattheothermanufacturer’sZ-Waveportable

controllerafterstartingthetransferontheDMPkeypad.Z-Wave

devicesareNOToverwrittenuntilthetransferhasbeeninitiated

at the other manufacturer’s Z-Wave portable controller. The

transfer should not be stopped once the process has been initiated

from the other manufacturer’s Z-Waveportablecontroller.

Transfer Operation:

1. Access the User Menu.

2. Press COMMANDuntilZWAVESETUP?displays.

3. Press any Select key. The keypad displays

ADDLISTREMOVE.

4. Press COMMANDagaintodisplayFAVXFERREDISC.Select

XFER. The keypad displays XFER WILL DELETE EXISTING

DEVICESthendisplaysXFERCNTRLSURE?YESNO.

5. Select YES to to allow receipt of Z-Wave devices to your

system. The keypad  displays TRANSFERRING Z-WAVE

DEVICES. Pressing the Back Arrow key cancels the transfer.

Select NO to exit the XFER menu and return to ZWAVE

SETUP?. All programming will still be intact on the DMP

Z-Wavecontrollerandwillcancelthetransfer.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 87 88

Comentarios a estos manuales

Sin comentarios

Digital Monitoring Products XR550 Guía de usuario Pagina 36

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Digital Monitoring Products XR550