Digital Monitoring Products Graphic Touchscreen Guía de usuario descargar pdf (Pagina 36)

XR150/XR350/XR550 User’s Guide 29User Menu

5. SelectALLtoplacealldisarmedzonesintoZoneMonitor.

5a. The keypad displays ALL? ADD RMV.

5b. SelectADDtoaddalldisarmedzonestoZoneMonitor.

5c. SelectRMVtoremovealldisarmedzones.

6. Select NBR to enter a specic zone number for zone

monitor.

7. IfyouselectNBR,thekeypaddisplaysZONE:-ADDRMV.

7a. Enter any zone number and select ADD to add this

zone.

7b. EnteranyzonenumberandselectRMVtoremovethis

zone.

8. The zone number automatically disappears. You can then

enteranewzonenumberandrepeatstep7aor7b.

Browser Feature

If you are unsure of the zone number or description, refer to

Appendix B at the back of this guide for a diagram showing you

how to use the built-in Zone Monitor browser.

System Status

Displays the current condition of internal system hardware.

System Status shows the panel condition of AC power, battery

power, and optional panel tamper. When System Status is selected,

each monitor displays followed by OKAY or TRBL (Trouble) to

indicate the current condition.

Using the System Status Function

1. Access the User Menu.

2. PressCOMMANDuntilSYSTEMSTATUS?displays.

3. Press any Select key. The display starts listing each system

monitor and status.

 Forexample:ACPOWER-OKAY

Below are the System Monitor displays:

Keypad Display What it monitors

ACPOWER ACpower

BATTERY Battery power

TAMPER Panel box tamper

ThesearefollowedbyeitherOKAYorTRBL(trouble).

If TRBL displays, call the service department for assistance.

4. The system then displays its rmware version, and then

exits the User Menu.

Forexample:VER_118_1/20/13MODELXR550

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 83 84

Sin comentarios

Digital Monitoring Products Graphic Touchscreen Guía de usuario Pagina 36