Digital Monitoring Products Graphic Touchscreen Guía de usuario descargar pdf (Pagina 23)

16 XR150/XR350/XR550 User’s Guide Arming and Disarming

7d. Select STOP to stop the system from arming. Correct

thezoneproblem(s)andreturntostep1.

Your system may be programmed to require a user code

thathasauthorizationtoforcearmorbypassafaulted

zone.Toforcearmorbypassafaultedzone,thesystem

asks you to enter a user code.

8. The display reads SYSTEM  ON if at least one area in the

system is armed, and ALL SYSTEM ON if all areas in the

system are armed.

Note: Your system may be pre-programmed at installation

for the Instant Arming option.

9. The keypad next displays EXIT: ## INSTANT and begins to

count down the number of seconds remaining for you to

exit.Whenthedelayexpires,theexitzonesarearmed.

10.YoucanselectINSTANTwhileEXIT:##INSTANTisdisplayed

toimmediatelyarmallexitzones andmaketheminstant.

The keypad displays INSTANT.

Quick Arming

To quickly arm a desired area, enter the area number followed by

theCOMMANDkeywhentheALL? NO YES option displays.

Checking the Armed Areas

After you have armed the system, you may press any Select key to

checkthearmedareaswhenALLSYSTEMONorSYSTEMONdisplays.

ThekeypadthendisplaysCHKARMEDAREAS:NAMENBRLIST.

Select NAME to list all of the armed areas by name. Select NBR to

enter the area number you would like to check. Select LIST to list

all of the armed areas by number.

Area System Disarming Operation

While the system is armed, you can only enter the premises

through an entry/exit delay door without causing an alarm. After

opening the door, the keypad sounds a prewarn tone to remind you

to disarm the system. You must disarm the system before the entry

delaytimeexpiresoranalarmonthedoorzoneoccurs.

Duringtheentrydelaytime,thekeypaddisplaysENTERCODE:and

thenameofthezonecausingtheentrydelay.Enteryourcodeto

disarmthesystem.Onlythoseareasassignedtoyourcodedisarms.

Note:Theprewarntonesilencesassoonastherstusercodedigit

key is pressed. If a valid user code is not entered or an invalid

usercodeisenteredwithinveseconds,theprewarntonebegins

sounding again.

Schedules: If you have programmed schedules for your system and

a code is entered outside of a schedule and that code does not have

authorizationtodisarmoutsideofschedules,thekeypaddisplays

INVALID TIME. This lets users know that they are attempting to

disarmoutsideoftheirauthorizedtime.

All or Selective Disarming: After entering your user code, the

system allows you to disarm either all of the areas to which you

have access or just selected areas. If you choose to disarm all

areas, the system automatically disarms them. If you choose to

disarm selected areas, the area names display on the keypad.

Alarm Display: After disarming, the keypad displays any zones

that tripped or any transmission problems that occurred dur ing the

armed period.All burglary zones are then disarmed and any by-

passedzonesareautomaticallyreset.

Disarmed Message: ThekeypaddisplaysALLSYSTEMOFFafterthe

system disarms.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 83 84

Comentarios a estos manuales

Sin comentarios

Digital Monitoring Products Graphic Touchscreen Guía de usuario Pagina 23

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Digital Monitoring Products Graphic Touchscreen