Digital Monitoring Products XR20 Guía de usuario descargar pdf (Pagina 43)

Appendix XR20 User’s Guide 39

ARMING AND DISARMING AN ALL/PERIMETER SYSTEM

Press COMMAND. The keypad displays PERIM ALL (when arming) or DISARM?. Press the Select key

under the desired option. The keypad displays ENTER CODE: -.

Present your card to the reader. Once the system validates the card, if you choose PERIM, only the

perimeter arms. If you choose ALL, both areas arm. If programmed on a 32-character keypad, ALL

is automatically chosen for you after a short delay. All armed areas disarm automatically.

ARMING AND DISARMING A HOME/AWAY SYSTEM

Present your card to the reader. If the system is armed, once the system validates the

card, all areas are disarmed and the keypad displays ALL SYSTEM OFF.

If the system is disarmed when you present your card, once the system validates the

card, HOME SLEEP AWAY displays. You can manually press the Select key under the

desired option or after short time all areas automatically arm in the AWAY mode.

ENTRY DELAY

All Systems - Once the protected door is opened and the entry

delay starts, the keypad displays ENTER CODE: - . Present your

card to the reader and, once validated, the system disarms

all areas and activates the Door Strike relay. The top line of

32-character keypads displays the zone name. Area systems

provide a delay to allow selected areas only to be disarmed. See

Arming and Disarming above and on the previous page.

Using the access reader for user menu access

You can also use a card reader to access the User Menu when

MENU? NO YES displays.

PERIM ALL

DISARM?

ABC SECURITY

ARM DISARM

ABC SECURITY

ENTER CODE: –

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 51 52

Sin comentarios

Digital Monitoring Products XR20 Guía de usuario Pagina 43