Digital Monitoring Products XR20 Guía de instalación descargar pdf (Pagina 28)

XRSuper6/XR20/XR40 Programming Guide

Digital Monitoring Products www.dmpnet.com 2500 N. Partnership Boulevard Springfield, MO 65803

9.5 AREA NUMBER (XR20/XR40 Only)

If you are programming an area system, enter the area number where this zone is

being assigned.

9.5A AREA ASSIGNMENT

For area systems, enter the area number. For All/Perimeter systems, choose

INTERIOR or PERIMETER. For Home/Away systems, choose INTERIOR, PERIMETER,

or BEDROOMS.

INT (Interior) - Assigns the zone to area 2, Interior.

BDRM (Bedroom)- Assigns the zone to area 3, Bedrooms. This option is only

displayed in Home/Away systems.

PERIM (Perimeter) - Assigns the zone to area 1, Perimeter.

9.6 ARMING ZONE AREA NUMBER (XR20/XR40 Only)

This option specifies the areas to be armed by the Arming Type zone. Press the

appropriate number keys on the keypad to assign areas 1 to 4. When disarmed, all

programmed areas are disarmed.

ARMING ZONE AREA ASSIGNMENT

For All/Perimeter systems, choose PERIM or ALL. For Home/Away systems, choose

HOME, SLEEP, or AWAY.

PERIMETER/ALL - Specify whether the arming zone arms just the Perimeter (PERIM)

or the Perimeter and Interior areas (ALL) for All/Perimeter systems. When

disarming, all areas are disarmed.

HOME/SLEEP/AWAY - Specify whether the arming zone arms the Perimeter (HOME),

the Perimeter and Interior (SLEEP), or all three areas (AWAY). When disarming, all

areas are disarmed.

Arming zone operation

If a bad (faulted) Priority zone is in the area being armed by an Arming zone, the

arming is stopped. If there are no Priority zones, or they are all in a normal

condition, the following applies:

When a non-Priority zone is bad when an area is armed with a keyswitch on an

Arming zone, the arming is delayed for five seconds. If, during the five-second

delay, the keyswitch is turned to disarm, the arming stops. If the keyswitch is held

in the arming position for the full five seconds, the bad zone is force armed and the

area is armed.

The ability to stop the arming does not apply if a wireless arming device is being

used. Refer to the Appendix.

ZONE INFORMATION

AREA:

PERIM ALL

HOME SLEEP AWAY

ARM AREA: PERIM

AREA NO: –

AREA: PERIMETER

INT BDRM PERIM

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 37 38

Comentarios a estos manuales

Sin comentarios

Digital Monitoring Products XR20 Guía de instalación Pagina 28

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Digital Monitoring Products XR20