Digital Monitoring Products Graphic Touchscreen Guía de usuario descargar pdf (Pagina 31)

User Menu XT30/XT50 User Guide 27

8. Press the COMMAND key to return to the device list and display

the next device in the list.

9. If the device stored in the system does not communicate, the

device name and FAILED displays. Press the COMMAND key

and REMOVE FAILED DEVICE displays.

10. Select YES to remove the failed device from the system

memory. Select NO to leave the device in the system memory

and to return to the device list.

11. When the device has been removed, the device name and

REMOVED is displayed and the system no longer tries to

communicate with the Z-Wave device.

Remove Z-Wave Devices (REMOVE)

Each Z-Wave device added to your system remains in your system

unless it is removed. This option allows you to remove Z-Wave

devices from your system.

1. Access the User Menu.

2. Press COMMAND until ZWAVE SETUP? displays.

3. Press any Select key. The keypad displays ADD LIST REMOVE.

4.SelectREMOVE.PROCESSINGmaybrieydisplay.WhenPRESS

BUTTON ON DEVICE TO REMOVE displays press the program

button on the Z-Wave device, the device name and REMOVED

is displayed to indicate the Z-Wave device has been removed.

Favorites (FAV)

Z-Wave devices can be grouped together to create a Favorite. This

option allows you to program up to 20 Favorites in your system and

then ADD, EDIT OR REMOVE up to 25 Z-Wave devices in a Favorite.

When activated from the FAVORITE user menu, a command is sent

to its Z-Wave Devices. A Favorite can only be activated, or turned

on. A separate Favorite must be created to change the conditions

set by the rst Favorite. For example, a Favorite called “Movie

Night” could lock the exterior doors, close the garage door, adjust

the temperature, and dim the lights in the family room to the

desired level. Another Favorite called “Wakeup” could then turn on

the lights, adjust the temperature, unlock the exterior doors, and

raise the garage doors.

Adding a FAVORITE

1. Access the User Menu.

2. Press COMMAND until ZWAVE SETUP? displays.

3. Press any Select key. The keypad displays ADD LIST REMOVE.

4. Press COMMAND again to display FAV XFER REDISC. Select FAV

and FAVORITE NUMBER: - is displayed.

5. Enter a Favorite number between 1 and 20 and press

COMMAND. If the Favorite number entered is unassigned,

*UNUSED* displays. If the Favorite is already assigned, you

may change the name or press the back arrow and enter a

new number.

6. Press any Select key and a cursor displays. Enter a Favorite

name up to 16 characters. To remove a Favorite, press

Command without entering a name.

7. Press COMMAND to save the Favorite and the Favorite name

and ADD EDIT REMOVE displays.

ADD Devices to FAVORITES

1. Access the User Menu.

2. Press COMMAND until ZWAVE SETUP? displays.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 66 67

Comentarios a estos manuales

Sin comentarios

Digital Monitoring Products Graphic Touchscreen Guía de usuario Pagina 31

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Digital Monitoring Products Graphic Touchscreen