Digital Monitoring Products Canadian XR100 Manual de usuario descargar pdf (Pagina 11)

Installing the Advanced Reporting Module

To obtain optimum results from the Advanced Reporting Module, it is highly recommended

that you install the software on a computer dedicated solely to the Advanced Reporting

Module and Remote Link or System Link.

The Advanced Reporting Module software package includes the CD-ROM, this User’s Guide,

and a Certificate of Authentication. The Certificate bears the Serial Number that is

needed to register and activate this program.

To use the Advanced Reporting Module, you must enter the serial number and enter an

Activation Code within 7 days of installation or it will cease to function. You can still be

able to use Remote Link, or System Link if it is properly activated.

1. Install Remote Link or System Link if it is not already installed on your computer.

2. Close, or Exit, Remote Link or System Link.

3. Place the Advanced Reporting Module CD-ROM in your computer's CD-ROM drive.

The installation process should start automatically. If the installation process does

not start within 30 seconds, click Start > Run, and enter D:\update.exe

(presuming that D:\ is your CD-ROM drive). Follow the directions on your screen to

install the Advanced Reporting Module.

Note: One Advanced Reporting Module may be installed on up to three (3) workstations

within One (1) end user organization. To install Advanced Reporting on additional

workstations, purchase multiple copies of Advanced Reporting or Advanced Reporting ADD.

Registering the Advanced Reporting Module

1. After installing the Advanced Reporting Module, start Remote Link or System Link.

2. Click on Help > Registration to open the Registration window and click the Add

button to open the Add Module window.

3. Enter the Serial Number found on the Certificate of Authentication. Click OK.

4. Close and then reopen Remote Link to activate the Advanced Reporting Module.

Activating the Advanced Reporting Module

You must activate Advanced Reporting Module within 7 days of installation. When

convenient for you, call Customer Service at 1-800-641-4282 to activate the Module.

1. Click Help > Registration to open the Registration window.

2. Select Advanced Reporting Module from the list in the Registration window. Click

the Activate button to open the Information window. This automatically

generates the Public Key number needed for proper activation.

3. Call Customer Service department at 1-800-641-4282 and give them the Serial

Number and the Public Key number. They will give you an Activation Code. Click

OK to close the Information window and open the Module Activation window.

Note: If you cannot call Customer Service immediately, click Cancel in the

Module Activation window. When you are ready to call Customer Service, repeat

the steps outlined above and continue with step 4 below.

4. Enter the Activation Code in the Module Activation window and click OK.

5. You should see a window that says, “Module Successfully Activated.” Click OK.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Sin comentarios

Digital Monitoring Products Canadian XR100 Manual de usuario Pagina 11