Digital Monitoring Products XTL Series Guía de instalación descargar pdf (Pagina 10)

XTL/XTLC Programming Guide Digital Monitoring Products

INTRODUCTION

1.6 Keypad

Connect up to four DMP 9060 and 9063 Wireless LCD Keypads to the XTL/XTLC panel. The operation is shown

and described in the following sections.

1.7 Special Keys

The following special keys are common to all DMP keypads.

COMMAND (CMD) Key

Pressing the COMMAND key allows you to go forward through the programming menu and through each step of a

programming sec tion. As you go through the programming, the keypad display shows any current programming

already stored in the panel memory. If no change is required for an option, press the COMMAND key to advance

to the next step.

The COMMAND key is also used to enter information into the panel’s memory such as phone numbers or zone

names. Press the COMMAND key after entering information.

Back Arrow (<—) Key

Use the Back Arrow key to back up one step while programming. The Back Arrow key is also used when an error

is made while entering in formation. Press the Back Arrow key once to erase the last character entered.

Select Keys

The top row of keys are called the Select keys on the 9000 Series Wireless Keypad.

Each time you need to press a Select key on 9000 Series keypad, the keypad displays the function or options

above one of the keys. Displaying choices above individual Select keys allows them to be used for many

different applications. For example, you can enter AM or PM when programming the automatic test time or

answer YES or NO for a system option.

During programming, the Select keys also allow you to change infor mation currently in panel memory by

pressing the appropriate Select key under or on the display. You then enter the new information using the

keypad data entry digit keys. The Select keys are also used for choosing a section from the pro gramming menu.

When the programming section name you want displays, press any Select key.

When there are more than four re sponse options avail able, press the COMMAND key to display the next one to

four options. Pressing the Back Arrow key allows you to review the previous four choices.

Note: When instructed to press the rst Select key, press the far left Select key; the second Select key is the

second from the left; third Select key is second from the right; and the fourth Select key is the far right key.

See Figure 2.

1.8 Entering Alpha Characters

Some options during programming require you to enter alpha characters. To enter an alpha character, press

or touch the key that has that letter written below it. The keypad displays the number digit of the key. Next,

press the Select key that corresponds to the loca tion of the letter under the key. Pressing a different Select key

changes the letter. When an other digit key is pressed, the last

letter displayed is retained and the process starts over.

32-Character Display

Data Entry Digit keys

COMMAND Key

Back Arrow Key

Select Keys

1 2 3 4

9 0 CMD

5 6 7 8

SMITH HOME

FRI 2:51 AM

Backlit Logo

and Proximity

Antenna

Figure 1: 9000 Series Wireless Keypad

First Letter

Second Letter

Third Letter

Special Character

(CBA

Figure 2: 9060/9063 Select Keys

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 48 49

Comentarios a estos manuales

Sin comentarios

Digital Monitoring Products XTL Series Guía de instalación Pagina 10

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Digital Monitoring Products XTL Series